Replacement Tires - TYCO US-1 Electric Trucking

TYCO US1 electric trucking replacement silicone tires.

These work great! The tires have a nice small rolled radius to the outer and inner edge. This improves performance and helps eliminate the tripping effect of the tires in the corners. I also made the inner diameters a good bit smaller so the tires have a nice snug fit and will not slip/spin or come off the rim. All my tires are degassed during my production process this gives a good consistent size and composition of the tire along with an air pocket-free tire. These are a great improvement over the stock rubber Tyco tires.

Tire Specs:

- .460 outside diameter measured with tire on the stock .275 diameter US-1 trucking rim.
- .245 inside diameter
- .230 wide

This site contains affiliate links for which I may be compensated. As an eBay Partner and Amazon Associate, I may be compensated if you make a purchase at no cost to you. I appreciate your support!

Tractor Self-Reset

Tyco US1 Tractor Self-Reset Modification. Allows the tractor to return to its original position without pushing it back. This is a must-have IMHO. I never liked forcing the bulldozer back into place!

Box Unloader Sign

The sign was easily broken over the years. I suggest printing this with White Natural Versatile Plastic for the least expensive and smooth texture. The other methods look grainy and ridiculous.

Freight Terminal Roof

Replacement backstop for your autoloader. Order in orange processed versatile plastic for a closer match. You will need to download the STL file and upload it to buy this part.

Freight Terminal Roof

I have two freight terminals. The roof was missing on one. You can buy the roof & building separately or download both files below.

Freight Terminal Building

I have two freight terminals. The roof was missing on one. You can buy the roof and the building separately. The download file has both pieces.

ACTION ACCESSORIES

Tyco US1 Tractor Self-Reset Modification. Allows the tractor to return to its original position without pushing it back.

Wrecker Light Bar, Wheels & Gears

This semi-transparent part contains 2 light bars, 3 geared wheel hubs, 2 non-geared wheel hubs, and 1 high-resolution gear for the Tyco Wrecker.

9 Gear Sets

Set of 9 gear pairs for use with Tyco US-1 Trucking vehicles. The gears will be printed on a support structure (sprue). It's common that the sprue might break off in the gear. As you push the motor or wheel shaft into the gear, the sprue will be pushed out the other side.

27 Spur Gears

27 spur gears. Sometimes the plastic shaft holding the gears can break off inside a gear instead of easily sliding out Use a paperclip, motor shaft, to push it out & clear the axle hole.